Emc Requirements; Maximum Power Losses - Siemens SINAMICS V20 Operating Instructions Manual

Technical specifications

EMC requirements

Note
Install all inverters in accordance with the manufacturer's guidelines and in accordance with
good EMC practices.
Use copper screened cable. For the maximum motor cable lengths, refer to Section
"Terminal description (Page 40)".
Do not exceed the default switching frequency.
ESD
Radiated immunity
Burst
Surge
Conducted immunity
Voltage distortion immunity
Conducted emissions
Radiated emissions

Maximum power losses

Three phase AC 400 V inverters
Frame size
Power rating (kW)
Maximum power loss (w)
1)
Single phase AC 230 V inverters
Frame size
Power rating (kW)
Maximum power loss (w)
1)
With I/O fully loaded
1)
Note
Power losses are given for nominal supply voltage, default switching frequency, and rated
output current. Changing these factors may result in increased power losses.
294
Three phase AC 400 V inverters
EN 61800-3 Category C3
Three phase AC 400 V filtered inverters:
EN 61800-3 Category C3
FSA
0.37 0.55 0.75 1.1 1.5
25 28 33 43 54
FSA
0.12 0.25 0.37 0.55 0.75 1.1
14 22 29 39 48
Single phase AC 230 V inverters
EN 61800-3 Category C3
Single phase AC 230 V filtered inverters:
EN 61800-3 Category C2
FSB FS FSD
C
2.2 3.0 4.0 5.5 7.5
68 82 100 145 180
FSB FSC
1.5 2.2 3.0
72 95 138 177
Operating Instructions, 09/2014, A5E34559884
FSE FSE
11 15 18.5 22
(H (LO (H
O) ) O)
276 338 38 475 45
7 7
SINAMICS V20 Inverter
(LO
)
626