Siemens SINAMICS V20 Operating Instructions Manual page 135

Request ID Description
4 Request descriptive element
6 Request parameter value (array)
7 Modify parameter value (array, word)
8 Modify parameter value (array, double word)
9 Request number of array elements
11 Modify parameter value (array, double word) and store in EEPROM
12 Modify parameter value (array, word) and store in EEPROM
13 Modify parameter value (double word) and store in EEPROM
14 Modify parameter value (word) and store in EEPROM
Response IDs (slave → master)
Response ID Description
0 No response
1 Transfer parameter value (word)
2 Transfer parameter value (double word)
3 Transfer descriptive element
4 Transfer parameter value (array, word)
5 Transfer parameter value (array, double word)
6 Transfer number of array elements
7 Request cannot be processed, task cannot be executed (with error number)
8 No master controller status/no parameter change rights for PKW interface
Error numbers in response ID 7 (request cannot be processed)
No. Description
0 Illegal PNU (illegal parameter number; parameter number not available)
1 Parameter value cannot be changed (parameter is read-only)
2 Lower or upper limit violated (limit exceeded)
3 Wrong sub-index
4 No array
5 Wrong parameter type/incorrect data type
6 Setting is not allowed (parameter value can only be reset to zero)
7 The descriptive element is not changeable and can only be read
9 Descriptive data not available
10 Access group incorrect
11 No parameter change rights. See parameter P0927. Must have status as master control.
12 Incorrect password
17 The current inverter operating status does not permit the request processing
18 Other error
20 Illegal value. Change request for a value which is within the limits, but it is not allowed for other reasons (pa-
rameter with defined single values)
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Communicating with the PLC
6.1 USS communication
Response ID
positive negative
3 7/8
4/5 7/8
4 7/8
5 7/8
6 7/8
5 7/8
4 7/8
2 7/8
1 7/8
135