Siemens SINAMICS V20 Operating Instructions Manual page 250

Parameter list
7.2 Parameter list
Parameter Function
P2268 Minimum value for PID
feedback [%]
Sets lower limit for value of feedback signal.
Notice: When PID is enabled (P2200 = 1) and the signal drops below this value, the inverter will trip with F221.
Note: P2268 = 100 % corresponds to 4000 hex.
P2269 Gain applied to PID
feedback
Allows the user to scale the PID feedback as a percentage value. A gain of 100.0 % means that feedback
signal has not changed from its default value.
P2270 PID feedback function
selector
Applies mathematical functions to the PID feedback signal, allowing multiplication of the result by P2269.
0
1
2
3
P2271 PID transducer type
Allows the user to select the transducer type for the PID feedback signal.
0
1
Notice: It is essential that you select the correct transducer type. If you are unsure whether 0 or 1 is applicable,
you can determine the correct type as follows:
1. Disable the PID function (P2200 = 0).
2. Increase the motor frequency while measuring the feedback signal.
3. If the feedback signal increases with an increase in motor frequency, the PID transducer type should
be 0.
4. If the feedback signal decreases with an increase in motor frequency the PID transducer type should
be set to 1.
r2272 CO: PID scaled feed-
back [%]
Displays PID scaled feedback signal.
Note: r2272 = 100 % corresponds to 4000 hex.
r2273 CO: PID error [%]
Displays PID error (difference) signal between setpoint and feedback signals.
Note: r2273 = 100 % corresponds to 4000 hex.
P2274 PID derivative time [s]
Sets PID derivative time.
P2274 = 0: The derivative term does not have any effect (it applies a gain of 1).
250
Range Factory Can be
default changed
-200.00 - 0.00 U, T
200.00
0.00 - 100.00 U, T
500.00
0 - 3 0 U, T
Disabled
Square root (root(x))
Square (x*x)
Cube (x*x*x)
0 - 1 0 U, T
Disabled
Inversion of PID feedback signal
- - -
- - -
0.000 - 0.000 U, T
60.000
Scaling Data
set
- -
- -
- -
- -
- -
- -
- -
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Data Acc.
type Level
Float 3
Float 3
U16 3
U16 2
Float 2
Float 2
Float 2