Connection Macro Cn001 - Bop As The Only Control Source - Siemens SINAMICS V20 Operating Instructions Manual

Connection macro Cn001 - BOP as the only control source

Connection macro settings:
Parameter Description
P0700[0] Selection of command source
P1000[0] Selection of frequency
P0731[0] BI: Function of digital output 1
P0732[0] BI: Function of digital output 2
P0771[0] CI: Analog output
P0810[0] BI: CDS bit 0 (Hand/Auto)
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Factory default Default for Cn001
1 1
1 1
52.3 52.2
52.7 52.3
21 21
0 0
Commissioning
5.5 Quick commissioning
Remarks
BOP
BOP MOP
Inverter running
Inverter fault active
Actual frequency
Hand mode
65