Outline Dimensions (Mm); Mmc / Sd Card Socket; Battery Power Supply; Dc 5 V Power Supply Socket - Siemens SINAMICS V20 Operating Instructions Manual
Hide thumbs
Also See for SINAMICS V20:
- Operating instructions manual (426 pages) ,
- Getting started (66 pages) ,
- Manual (40 pages)
Table of Contents
Advertisement
Options and spare parts
B.1 Options
Outline dimensions (mm)
Functionality
The Parameter Loader provides the ability to upload/download parameter sets between the
inverter and an MMC / SD card. It is only a commissioning tool and has to be removed
during normal operation.
Note
To clone saved parameter settings from one inverter to another, a Parameter Loader is
required. For detailed information about clone steps, see the data transferring steps
described in this section.
During parameter cloning, make sure you either connect the PE terminal to earth or observe
ESD protective measures.
MMC / SD card socket
The Parameter Loader contains an MMC/ SD card socket which is connected directly to the
expansion port on the inverter.
Battery power supply
In addition to the memory card interface, the Parameter Loader can hold two batteries
(consumer grade, non-rechargeable carbon-zinc or alkaline AA size batteries only) which
allow the inverter to be powered directly from this option module when the mains power is
not available. If the inverter can be supplied from the mains power, it is not necessary to
power the Parameter Loader from the batteries.
DC 5 V power supply socket
The Parameter Loader contains a 5 V DC power supply socket for connection to an external
Class 2 DC power supply. When mains power is not available to the inverter, it is possible to
power the Parameter Loader from this DC supply rather than using batteries.
302
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Hide quick links:
Advertisement
Table of Contents
