Viewing Inverter Status; Editing Parameters; Parameter Types - Siemens SINAMICS V20 Operating Instructions Manual

5.1.3

Viewing inverter status

The display menu provides a basic monitoring view of some key parameters such as
frequency, voltage, current, and so on.
Note
For detailed information about the display menu structure with active faults, see Section
"Faults (Page 281)".
5.1.4

Editing parameters

This section describes how to edit the parameters.

Parameter types

Parameter type
CDS-dependent parameters
DDS-dependent parameters
Other parameters
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Multi-indexed parameters
Index-free parameters
5.1 The built-in Basic Operator Panel (BOP)
Description
Dependent on Command Data Set (CDS)
•
Always indexed with [0...2]
•
Available for CDS switching via P0810 and
•
P0811
Dependent on Inverter Data Set (DDS)
•
Always indexed with [0...2]
•
Available for DDS switching via P0820 and
•
P0821
These parameters are indexed with the range of
indices dependent on the individual parameter.
These parameters are not indexed.
Commissioning
53