Din Rail Mounting (Frame Sizes A To B); Installing The Frame Size A To The Din Rail - Siemens SINAMICS V20 Operating Instructions Manual

3.5

DIN rail mounting (frame sizes A to B)

By means of the optional DIN rail mounting kit, you can mount the frame size A or B on the
DIN rail.
Two additional mounting methods are also available for different frame sizes. For more
details, refer to the following sections:
● Cabinet panel mounting (frame sizes A to E) (Page 26)
● Push-through mounting (frame sizes B to E) (Page 30)
Note
To install or remove FSA/FSB, you can use a crosshead or flat-bit screwdriver.

Installing the frame size A to the DIN rail

SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Mechanical installation
3.5 DIN rail mounting (frame sizes A to B)
33