Running The Inverter In Cavitation Protection Mode - Siemens SINAMICS V20 Operating Instructions Manual

5.6.3.14

Running the inverter in cavitation protection mode

Functionality
The cavitation protection will generate a fault / warning when cavitation conditions are
deemed to be present. If the inverter gets no feedback from the pump transducer, it will trip
to stop cavitation damage.
Setting parameters
Parameter Function
P2360[0...2] Enable cavitation protection
P2361[0...2] Cavitation threshold [%]
SINAMICS V20 Inverter
Operating Instructions, 09/2014, A5E34559884
Setting
This parameter enables the cavitation protection function.
= 1: Fault
= 2: Warn
This parameter defines the feedback threshold over which a
fault / warning is triggered, as a percentage (%).
Range: 0.00 to 200.00 (factory default: 40.00)
Commissioning
5.6 Function commissioning
125