Creating An Ipv4 Static Route - HP 830 Series Configuration Manual

Table 83 Field description
Field
Destination IP Address
Mask
Protocol
Preference
Next Hop
Interface

Creating an IPv4 static route

1. Select Network > IPv4 Routing from the navigation tree.
2. Click the Create tab.
The page for configuring IPv4 static route appears.
Figure 233 Creating an IPv4 static route
3. Create an IPv4 static route as described in
4. Click Apply.
Table 84 Configuration items
Item
Destination IP Address
Mask
Description
Destination IP address and subnet mask of the IPv4 route..
Protocol that discovered the IPv4 route.
Preference value for the IPv4 route.
The smaller the number, the higher the preference.
Next hop IP address of the IPv4 route.
Outgoing interface of the IPv4 route. Packets destined for the specified
network segment are sent out of the interface.
Table
Description
Enter the destination host or network IP address, in dotted decimal notation.
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
251
84.