Creating An Ipv4 Static Route - HP 1910 User Manual

Field
Next Hop
Interface

Creating an IPv4 static route

1. Select Network > IPv4 Routing from the navigation tree.
2. Click the Create tab.
The page for configuring an IPv4 static route appears.
Figure 269 Creating an IPv4 static route
3. Create an IPv4 static route as described in
4. Click Apply.
Table 91 Configuration items
Item
Destination IP Address
Mask
Description
Next hop IP address of the IPv4 route.
Output interface of the IPv4 route. Packets destined for the specified
network segment will be sent out of the interface.
Table
Description
Enter the destination host or network IP address in dotted decimal notation.
Enter the mask of the destination IP address.
You can enter a mask length or a mask in dotted decimal notation.
303
91.