Modifying Ports - HP FlexNetwork NJ5000 User Manual

Modifying ports

From the navigation tree, select Network > VLAN.
1.
Click Modify Port.
2.
The page for modifying ports appears.
Figure 122 Modifying ports
Modify the VLANs of a port as described in
3.
Click Apply.
4.
A progress dialog box appears.
Click Close on the progress dialog box when the dialog box prompts that the configuration
5.
succeeds.
Table 48 Configuration items
Item
Select Ports
Select
membership
type
VLAN IDs
Description
Select the ports to be modified.
Set the member types of the selected ports to be modified in the specified VLANs:
•
Untagged—Configures the ports to send the traffic of the VLANs after removing the
VLAN tags.
•
Tagged—Configures the ports to send the traffic of the VLANs without removing the
VLAN tags.
•
Not a Member—Removes the ports from the VLANs.
Set the IDs of the VLANs to or from which the selected ports are to be assigned or
removed.
When you set the VLAN IDs, follow these guidelines:
•
You cannot configure an access port as an untagged member of a nonexistent VLAN.
•
When you configure an access port as a tagged member of a VLAN, or configure a
trunk port as an untagged member of multiple VLANs in bulk, the link type of the port
is automatically changed into hybrid.
Table 48.
116