Modifying Ports - HP V1910 Switch Series User Manual

Modifying ports

Select Network > VLAN from the navigation tree and click the Modify Port tab to enter the page shown
in Figure 126.
Figure 126 The Modify Port tab
Table 54 Configuration items of modifying ports
Item
Select Ports
Select
membership
type
VLAN IDs
Description
Select the ports to be modified.
Click one or more ports you want to modify on the chassis front panel.
If aggregate interfaces are configured on the device, the page displays a list of
aggregate interfaces below the chassis front panel, and you can select
aggregate interfaces from this list.
Set the member types of the selected ports to be modified in the specified VLANs.
Untagged
The options include:

Untagged—Assign the selected ports to the specified VLANs as untagged
members. After that, the ports send the traffic of those VLANs after removing
Tagged
the VLAN tags.

Tagged—Assign the selected ports to the specified VLANs as tagged
members. After that, the ports send the traffic of those VLANs without removing
Not A
the VLAN tags.
Member

Not A Member—Remove the selected ports from the specified VLANs.
Set the IDs of the VLANs that the selected ports are to be assigned to or removed
from. This item is available when the Untagged, Tagged, or Not A Member option
is selected in the Select membership type area.
140