Switching To The Management Level - HP 1920 Gigabit Ethernet Switch Series User Manual

4. Click Apply.
Table 19 Configuration items
Item
Create/Remove
Password
Confirm Password
Password
Encryption

Switching to the management level

A non-management level user can switch to the management level after providing the correct super
password.
The level switching operation does not change the access level setting for the user. When the user logs
in to the Web interface again, the access level of the user is still the level set for the user.
To switch to the management level:
1. Select Device > Users from the navigation tree.
2. Click the Switch To Management tab.
3. Enter the correct super password.
4. Click Login.
Figure 74 Switching to the management level
Description
Select the operation type:
•
Create—Configure or change the super password.
•
Remove—Remove the current super password.
Set the password for non-management level users to switch to the management level.
Enter the same password again.
Select the password encryption type:
•
Reversible—Uses a reversible encryption algorithm. The ciphertext password can be
decrypted to get the plaintext password.
•
Irreversible—Uses an irreversible encryption algorithm. The ciphertext password
cannot be decrypted to get the plaintext password.
88