Switching To The Management Level - HP 1910 User Manual

3. Configure the super password as described in
4. Click Apply.
Table 17 Configuration items
Item
Create/Remove
Password
Confirm Password
Password
Encryption

Switching to the management level

A non-management-level user must provide the correct super password to switch to the management
level.
The access level switching is valid only for the current login. The switching does not change the access
level setting for the user. When the user logs in again to the Web interface, the user's access level is still
the configured level.
To switch to the management level:
1. Select Device > Users from the navigation tree.
2. Click the Switch To Management tab.
3. Enter the correct super password.
4. Click Login.
Figure 77 Switching to the management level
Description
Select the operation type:
•
Create—Configures or modifies the super password.
•
Remove—Removes the current super password.
Set the password for non-management-level users to switch to the management level.
Enter the same password again.
Select the password encryption mode:
•
Reversible—Uses a reversible algorithm to encrypt the password before saving the
password.
•
Irreversible—Uses an irreversible algorithm to encrypt the password before saving the
password.
Table 17.
96