Igmp Snooping Configuration Task List - HP FlexNetwork 7500 Series Configuration Manual

IGMP snooping configuration task list

Tasks at a glance
Configuring basic IGMP snooping
•
(Required.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring IGMP snooping port
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring the IGMP snooping
•
(Optional.)
•
(Optional.)
Configuring parameters for IGMP
•
(Optional.)
•
(Optional.)
Configuring IGMP snooping
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
•
(Optional.)
Configuring basic IGMP snooping features
Before you configure basic IGMP snooping features, complete the following tasks:
•
Configure VLANs.
•
Determine the IGMP snooping version.
•
Determine the maximum number of IGMP snooping forwarding entries.
•
Determine the IGMP last member query interval.
Enabling IGMP snooping
When you enable IGMP snooping, follow these guidelines:
•
You must enable IGMP snooping globally before you enable it for a VLAN.
•
IGMP snooping configuration made in VLAN view takes effect only on the member ports in that
VLAN.
•
You can enable IGMP snooping for the specified VLANs in IGMP-snooping view or for a VLAN
in VLAN view. For a VLAN, the configuration in VLAN view has the same priority as the
configuration in IGMP-snooping view, and the most recent configuration takes effect.
features:
Enabling IGMP snooping
Specifying an IGMP snooping version
Setting the maximum number of IGMP snooping forwarding entries
Setting the IGMP last member query interval
features:
Setting aging timers for dynamic ports
Configuring static ports
Configuring a port as a simulated member host
Enabling fast-leave processing
Disabling a port from becoming a dynamic router port
querier:
Enabling the IGMP snooping querier
Configuring parameters for IGMP general queries and responses
messages:
Configuring source IP addresses for IGMP messages
Setting the 802.1p priority for IGMP messages
policies:
Configuring a multicast group policy
Enabling multicast source port filtering
Enabling dropping unknown multicast data
Enabling IGMP report suppression
Setting the maximum number of multicast groups on a port
Enabling multicast group replacement
16