Before Making Copies
To interrupt the low power mode to activate the machine
%
!
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Position the original.
–
Pressing any key or the surface of
the touch panel also returns the
machine to an operational state.
The touch panel display reappears
and, after the machine has finished
warming up, it is ready to operate
again.
Detail
Originals can be scanned while the machine is warming up. For details,
refer to "Setting Job During Warmup" on page 4-73.
Detail
The length of time until the machine enters Low Power mode can be
changed. For details, refer to "1 Power Save Setting" on page 16-34.
If the time for entering Low Power mode and Sleep mode are the same,
the machine will immediately enter Sleep mode without entering Low
Power mode.
3
3-37