To Copy Using Book Copy - Konica Minolta bizhub 500 User Manual

6

To copy using Book Copy

0 Scan the original from original glass with the ADF kept open. The ADF
cannot be used to scan the original.
0 Non-Image Area Erase will be specified automatically.
0 Original Direction and Margin settings are unavailable.
0 With Book Copy specified, tray 1 will be automatically selected as copy
paper tray source.
Change the tray selection manually, if desired. In this case, the scanning
area will be automatically determined according to the selected paper
size. Auto Paper Select will not function.
0 Specify the binding position of the original. This setting will be effective
with Separation, Front Cover, or Front and Back Cover selected, but null
for the Book Spread mode.
0 Using Book Copy along with Centering, the original can be placed
anywhere on the original glass.
0 Use Erase/Center Erase to copy eliminating black copy marks along
borders.
0 Auto Zoom will not function. The magnification can be changed as
desired.
1
Downloaded From ManualsPrinter.com Manuals
6-44
Position the original on the original glass.
– Position the upper-left corner of the original to meet with the rear-
left corner of the original glass. Keep the ADF open.
– When using Book Spread or Separation mode, place the first page
of spread original.
– When using Front Cover or Front
and Back Cover mode, place the
front cover facedown.
– When using Centering in
combination, the original can be
located at any place provided it is
not skewed.
Application Functions
bizhub 500/420/360 (Phase 3)