Basic Copy Operations
4.5
Paper Size Setting
The following two modes are provided to select the paper size.
Select either mode to cope with the desired copying operation.
- Automatically select the paper size according to the original size.
- Manually select the desired paper size.
To select paper size automatically (Auto Paper Select)
This mode detects the original size placed in the ADF or on the original glass
and makes a copy of an appropriate paper size selected automatically.
If Zoom is set to e1.000, the machine selects the same paper size as the
original.
If other magnification ratio is selected, the machine automatically specifies
an appropriate paper size according to the magnification ratio selected.
0 The machine is initially set to operate e1.000 Zoom and Auto Paper
0 Auto Paper Select and Auto Zoom are incompatible.
0 The paper size loaded in bypass tray can also be detected and selected
0 The trays specified as "Special Paper" cannot be selected by Auto Paper
1
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select as factory default.
automatically by Auto Paper Select.
Select. Use this setting for loading special paper in a tray.
See page 15-12 for details of "Paper Type", and see "Paper Setting for
Bypass Tray" on page 4-23.
Touch [Paper] on the Basic Screen.
The Paper Screen will be displayed.
4
4-19