Storing And Recalling Job Settings (Mode Memory); To Store Copy Program - Konica Minolta bizhub 500 User Manual

Advanced Information
8.4

Storing and Recalling Job Settings (Mode Memory)

Use Mode Memory to store the desired copy job settings, which can be
readily recalled at any time for copying. This function is convenient for
frequently used settings of complicated operation.
We recommend you to store those complicated settings that can be
expected for another or more use.

To store copy program

Up to 30 copy programs can be stored with given alphanumeric names.
0 Name the stored program. Up to 16 characters can be used.
0 The given name can be edited. For details, see "To change program
0 The contents of stored program cannot be altered for reentry. However,
0 If 30 copy programs are already stored, new entry becomes unavailable.
0 The administrator can set the machine to lock the programs so that they
1
2
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
name" on page 8-18.
setting change is available for the program once recalled to make a copy,
and those job settings can be stored as a new program.
In this case, delete an unnecessary program to store a new program. For
details on deleting copy programs, see "To delete copy program" on
page 8-20
cannot be deleted individually or the given name cannot be edited. For
details, see "6 Restrict User Access>1 Restrict Access to Saved Program
Jobs" on page 16-63.
Position the original, then make the desired job settings.
– Use control panel and touch panel keys to select the desired copy
conditions.
Press [Mode Memory] on the control
panel.
The Recall Copy Program Screen will
be displayed.
8
8-11