Konica Minolta bizhub 500 User Manual page 103

Before Making Copies
4
5
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Enter the duration of machine operation from the keypad on the control
panel.
– Enter the duration before the machine enters the Sleep mode again.
Specify a length of time between 5 minutes and 9 hours and 59
minutes.
Touch [OK].
The Basic Screen is displayed with the message "Ready to copy".
Copy functions become available.
Detail
If only one digit is to be specified for the duration, make it two digits by
adding 0 for the tens place. If the duration of less than 5 minutes is
specified, it is automatically changed to 5 minutes.In addition, a minutes
setting of 60 or more cannot be specified.
Reminder
If you finish using the machine before the set length of time, you can
press and hold the [Power Save] key to apply the Sleep mode.
3
3-43