Utility <Administrator Setting>
3
4
5
6
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select whether or not to use the summer time.
The Daylight Saving Time function is initially deactivated.
–
To activate this function, touch [ON] to highlight it.
Specify the time to gain.
–
Use the control panel keypad to enter the desired amount of time
from 1 to 150 minutes in 1 minute increments.
Entered amount will be displayed on the right side of the screen.
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the System Setting Screen will be restored.
If further changes are required, touch the desired key.
Note
The Daylight Saving Time Setting can be accessed also from the User
Setting Screen if the Administrator Security Level in the Administrator
Setting is set to Level 2.
16
16-47