To Empty The Dust Box Of Fs-511 - Konica Minolta bizhub 500 User Manual

11

To empty the dust box of FS-511

0 Even when the punch dust box is full, the message is not displayed.
Before using punch mode, perform the following procedure to check if
the punch dust box, if needed.
0 The punch dust box is not disposable. Be sure to return it to its original
position.
1
2
3
Downloaded From ManualsPrinter.com Manuals
11-22
Slide the finisher to the left.
– Holding the finisher handle on the
top, slide the finisher to the left
until it stops.
Open the finisher right door FN7.
Pull out the punch dust box.
Supplies & Handling
bizhub 500/420/360 (Phase 3)