To Replace The Staple Cartridge For Saddle Stitcher Sd-502 - Konica Minolta bizhub 500 User Manual

11

To replace the staple cartridge for Saddle stitcher SD-502

0 Be sure to replace the saddle staple cartridge after displaying the
message, otherwise the machine may be dameged.
1
2
3
Downloaded From ManualsPrinter.com Manuals
11-18
Pull the saddle stitcher tray open and
hold it as it is.
– It is not possible to leave the tray
is kept open.Do not release it
suddenly.
– If the extensible tray of the tray 1
just under the saddle stitcher tray
is withdrawn, push it back to its
original position, otherwise it may
disturb you in the following
procedure or machine trouble may occur.
Remove the staple holder.
– Push down the staple holder as
shown right, then pull forward to
remove it.
– Please check the message which
stapler to remove.
Saddle staple cartridge 1: rear
side
Saddle staple cartridge 2: front
side
– Gently return the saddle stitcher tray to its original position.
Remove the empty saddle staple
cartridge.
– Push the two "PUSH" buttons of
the staple holder to slide the top
cover upward, then remove the
empty saddle staple cartridge.
Supplies & Handling
1
bizhub 500/420/360 (Phase 3)
2