6
9
10
11
Downloaded From ManualsPrinter.com Manuals
6-56
–
To enter the dimensions of scanning area, touch [Custom Size] on
the Standard Size Screen to display the Custom Size Screen, then
enter the desired dimensions from the control panel keypad. In
order to specify a fraction, touch the bidirectional arrow key to
move the cursor, then use [+] and [–] to enter the desired value in
0.1 mm increments.
–
When [Set Range] is selected, close the ADF.
Do you want to delete the dimensions once entered?
?
% Press [C] (Clear) on the control panel, then enter the correct
dimensions.
Touch [OK] to return to the Application Screen.
–
Touch [Cancel] on the Image Repeat Screen, Standard Size Screen
or Custom Size Screen to cancel the setting change.
Select additional copy conditions, as desired.
–
Specify the desired magnification.
The number of repeats will be determined automatically from
specified scanning area, selected paper size and magnification
ratio.
Press [Start] on the control panel.
The machine will start printing when ready for output.
Application Functions
bizhub 500/420/360 (Phase 3)