Limiting Machine Usage (Weekly Timer) - Konica Minolta bizhub 500 User Manual

Before Making Copies

Limiting Machine Usage (Weekly Timer)

The machine can be set to automatically enter the sleep mode according to
a usage schedule determined by the administrator or limitations on the use
of the machine can be specified.
This is the weekly timer.
When the weekly timer is functioning and the machine is in the sleep mode,
the [Power Save] key and the main power indicator light up in green, and the
touch panel and all the other indicators go off. The machine is not operational
while it is in this state.
The length of time before the machine enters the sleep mode can be
changed. While the machine is in the Sleep mode, entering the password for
non-business hours and specifying the duration of operation will make it
available. For information on operating the machine when it is in the sleep
mode by the weekly timer, refer to "Operating the Machine During Non-
Business Hours (Weekly Timer)" on page 3-42.
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Detail
The weekly timer is not set as the factory default. The weekly timer is set
in the Administrator mode. For details, refer to "5 Weekly Timer Setting>1
Weekly Timer ON/OFF Setting" on page 16-49.
To specify that the password for non-business hours should be entered
prior to setting the duration before the machine returns to the sleep mode
again, use the Administrator mode. This function is not set as the factory
default. For details, refer to "6 Restrict User Access>1 Restrict Access to
Saved Program Jobs" on page 16-63.
3
3-41