Konica Minolta bizhub 500 User Manual page 373

Application Functions
7
8
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
– If the message "Name is in use. Do you want to overwrite the
present overlay image?" is displayed, the image previously
registered can be overwritten. Touching [Yes] will delete the
previous image to overwrite it with the new one. To enter a new
name, touch [No].
– If the message "Name is in use. Please enter another name" is
displayed, the entered name cannot be used. Touch [OK], then
repeat the procedure to enter a new name. Administrator can
specify whether to allow or restrict the Changing Image Overlay
setting in the Utility mode. For details, see "6 Restrict User
Access>3 Restrict Access to Job Settings" on page 16-67.
Touch [OK] to display the Stamp/Overlay Screen.
Press [Start] on the control panel.
The scanned image will be registered and the Basic Screen will be
restored.
6
6-131