Utility <Administrator Setting>
3
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select the condition to operate the Non Image Area Erase function.
–
Touch [Non Image Area Erase] to display the Non Image Area Erase
Screen.
–
Select the desired condition to operate this function.
[Always]: No condition is specified.
[Only when Auto Size or ×1.0 is selected]: Operates only when Auto
Size or e1.0 magnification ratio is selected.
[Do Not Erase when ×1.0 is selected]: Operates when any
magnification ratio except e1.0 is specified.
–
Touch [OK] to complete the setting.
To cancel the change, touch [Cancel]. In either case, the Non Image
Area Erase Screen will be restored.
16
16-73