Operating The Machine During Non-Business Hours (Weekly Timer) - Konica Minolta bizhub 500 User Manual

3

Operating the Machine During Non-Business Hours (Weekly Timer)

The following steps show how to operate the machine when it is in the Sleep
mode by the weekly timer.
0 The weekly timer is set in the Administrator mode.
0 Interrupt the Sleep mode, and specify the duration before the machine
returns to the Sleep mode.
0 If the password for non-business hours is set by the administrator, this
password must be entered before specifying the duration for user
operations.
1
2
3
Downloaded From ManualsPrinter.com Manuals
3-42
Position original, or press any key on
the control panel.
– The Operating Time Setting
Screen will be displayed.
Proceed to Step 4.
– If the password for non-business
hours is set, the Password Input
Screen appears. Proceed to
Step 2.
Enter the password for non-business hours from the keypad.
– The password can be specified up to 8 digits.
– To correct inputting errors, touch [Delete] and enter the correct
password.
Touch [OK].
The Operating Time Setting screen will be displayed.
Before Making Copies
bizhub 500/420/360 (Phase 3)