6
6
7
8
9
Note
To release the selected application function, touch [OFF].
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
Downloaded From ManualsPrinter.com Manuals
6-84
Adjust the position of the back-side image.
–
Touch [Edit 2nd Side] on the Edit Margin Screen to display the Edit
2nd Side Screen.
–
Specify the shift direction and amount of the back-side image
similarly in step 5.
Touch [OK] to return to the Application Screen.
–
Touch [Cancel] on the Page Margin Screen, Edit Margin Screen, or
Edit 2nd Side Screen to cancel the setting change.
Select additional copy conditions, as desired.
Press [Start] on the control panel.
The machine will start scanning the original, then printing when ready
for output.
Application Functions
bizhub 500/420/360 (Phase 3)