Utility <Administrator Setting>
3
4
5
6
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
The Original Image Density Screen will be displayed.
Touch either [Copy] or [Fax] under Function in the left side area of the
screen.
Select the original type to be adjusted in the center of the screen, then
touch [Light] or [Dark] in the right side area of the screen to specify the
desired adjustment level.
–
Repeat this step to make an adjustment for each original type.
Touch [OK] to complete the setting.
–
To cancel the change, touch [Cancel].
In either case, the Expert Adjustment Screen will be restored.
If further changes are required, touch the desired key.
Note
The Original Image Density can be accessed also from the User Setting
Screen if the Administrator Security Level in the Administrator Setting is
set to Level 2.
16
16-71