Konica Minolta bizhub 500 User Manual page 333

Application Functions
4
5
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Touch [Erase], then touch [Center Erase] again.
The Center Erase Screen will be displayed.
Specify the erasure amount.
– Use [+] and [–], or control panel keypad to enter the desired erasure
amount. In order to specify a fraction, touch the bidirectional arrow
key to move the cursor, then use [+] and [–] to enter the desired
value in 0.1 mm increments.
6
6-91