Konica Minolta bizhub 500 User Manual page 171

Basic Copy Operations
3
4
5
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Enter the desired magnification ratio (e0.250 to e4.000) from the
control panel keypad.
Entered ratio will be displayed in the Zoom with Constant X and Y Ratio
area.
What should be done if the message "Input Error" is displayed and
?
entered size is ignored?
The value just entered is out of available range.
% Press [C] (Clear) on the control panel, then reenter the correct value.
Touch [OK].
– Touching [Cancel] will clear the magnification ratio entered on the
XY Zoom Screen.
The Zoom Screen will be restored.
Touch [OK].
The Basic Screen will be restored with the specified magnification ratio
displayed on the Zoom key.
4
4-43