To Copy Using Booklet - Konica Minolta bizhub 500 User Manual

6

To copy using Booklet

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 4-69.
0 Original pages should be a multiple of 4 in 1%2 mode, or a multiple of 2
in 2%2 mode. Otherwise, blank pages are automatically inserted to the
last.
0 The original size is detected when loaded in the ADF, then the machine
automatically specifies the recommended magnification ratio of e0.707
and an appropriate paper size with Auto Paper Select activated.
The machine can be set to change the recommended magnification ratio
manually. For details, see "Auto Zoom for Combine/Booklet" on
page 15-38.
0 The binding margin will be automatically specified.
0 If the machine is equipped with Finisher FS-510 and Saddle Stitcher SD-
502 options, the finished sets can be half-folded and also stapled in the
center. For details, see "Folding Copies at the Center/Binding Copies at
the Center: Half Fold/ Fold & Staple" on page 7-24.
1
2
3
Downloaded From ManualsPrinter.com Manuals
6-70
Load the original in the ADF.
Enter the desired print quantity from the control panel keypad.
Touch [Application] tab on the Basic Screen.
The Application Screen will be displayed.
Application Functions
bizhub 500/420/360 (Phase 3)