Application Functions
5
6
7
8
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Position the original to be overlaid.
Press [Start] to scan.
–
Repeat steps 5 and 6 for all originals.
Touch [Complete Scan] on the Basic Screen.
Press [Start].
The machine will start printing when ready for output.
Note
To release all the application functions, touch [Reset].
To resume the initial setting for all settings including application function,
press [Reset] on the control panel.
Note
If no other setting is desired, the copy job can be started using the
settings currently specified without touching [OK] to return to the
Application Screen or Basic Screen.
6
6-127