When The Message; Memory Becomes Full While Scanning - Konica Minolta bizhub 500 User Manual

12
12.3 When the Message "...Not Enough Remaining
Memory" Is Displayed
This machine uses the memory to produce copies.
Since the amount of memory available is limited, the message "Scanning
cannot be continued. Not enough remaining memory." or "The job has been
deleted. Not enough remaining memory." is displayed if the memory
becomes full while copying.
Continue the operation according to the corresponding instructions.

Memory Becomes Full While Scanning

This message is displayed when the memory becomes full and scanning
stops while scanning in Copy mode.
Display in Enlarge Display Mode
Continue the operation according to the following instructions.
- To print all pages that have been scanned, touch [Print].
- To delete the job for the scanned pages, touch [Delete].
Downloaded From ManualsPrinter.com Manuals
12-10
Troubleshooting
bizhub 500/420/360 (Phase 3)