Konica Minolta bizhub 500 User Manual page 711

Utility <Administrator Setting>
3
4
5
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select the desired priority mode in the left side area of the screen.
Touch [Copy], [Scan], or [Fax] to highlight it.
In the right side area of the screen, specify the period of time before
System Auto Reset is activated. Select the desired time from 1 to 9
minutes.
When touching [OFF] to highlight it, System Auto Reset is not
activated.
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Reset Setting Screen will be restored.
If further changes are required, touch the desired key.
Note
With OFF selected for System Auto Reset function, the Enlarge Display
mode will not be released, while User Authentication/ Account Track
function will be cancelled in one minute.
16
16-89