Paper Setting For Bypass Tray - Konica Minolta bizhub 500 User Manual

Basic Copy Operations
4.6

Paper Setting for Bypass Tray

This section describes how to specify the size and type of copy paper loaded
in the bypass tray.
The bypass tray is generally used in the following cases.
- Auto Detect Setting
- Custom Size Setting
- Paper Type Setting
!
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Used as one of the trays loaded with normal paper of the size available
for Auto Paper Select.
Used when loading paper of special size that cannot be loaded in other
trays.
Used when loading paper of special type that cannot be loaded in other
trays.
Detail
Special paper type can also be loaded in the other trays on a regular
basis. The paper type setting for these trays is provided in User Setting
of the Utility/Counter Screen. See "3 Paper Tray Setting > 1 Paper Type"
on page 15-12 for details.
The custom size setting is unavailable for the trays except bypass tray.7
For details on loading paper in the bypass tray, see "To load paper into
the bypass tray" on page 3-61.
4
4-23