Konica Minolta bizhub 500 User Manual page 696

16
4
Downloaded From ManualsPrinter.com Manuals
16-74
Select the desired operation of Non Image Area Erase function.
– Touch [Non Image Area Erase Setting] to display the Non Image
Area Erase Setting Screen.
– Select the desired machine operation of this function.
[Auto]: Erases automatically.
[Specify]: Erase type and original density specified on this screen
will be applied. Five levels are provided to adjust the original
density.
– Specify the erase type and original density.
Touch either [Diagonal Erase] or [Square Erase] to highlight it.
To specify the original density level, touch [Light] or [Dark] to
highlight the desired level. Touch [Std.] to restore the standard
level.
– Touch [OK] to complete the setting.
To cancel the change, touch [Cancel]. In either case, the Non Image
Area Erase Screen will be restored.
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)