Konica Minolta bizhub 500 User Manual page 330

6
5
6
Downloaded From ManualsPrinter.com Manuals
6-88
Specify the erasing position and erasure amount.
– To specify the erasure amount collectively for all four sides, touch
[Frame] to highlight it.
– To specify the erasure amount individually for each side, touch the
desired side key to highlight it.
Use [+] and [–] to enter a fraction in 0.1 mm increments. Touch the
bidirectional arrow key to move the cursor, then use [+], [–], or
control panel keypad to enter whole number part of the desired
value. Or, touch [None] to void the function on that side.
? Is it available to select [Frame] and other four keys ([Top], [Left],
[Right], and [Bottom]) at the same time?
% No. Use [Frame] only for specifying the same erasure amount
collectively for all four sides.
? Do you want to change the currently entered value using control
panel keypad?
% Press [C] (Clear) on the control panel, then enter the correct value.
What if the value just entered is out of available range?
?
% The Input Error message will be displayed. Press [C] (Clear) on the
control panel, then reenter the correct value.
Is it available to change the side to be erased even if the erasure
?
amount is already specified?
% No.
Touch [OK] to return to the Application Screen.
– Touch [Cancel] on the Erase Screen to cancel the setting change.
Application Functions
bizhub 500/420/360 (Phase 3)