Konica Minolta bizhub 500 User Manual page 681

Utility <Administrator Setting>
3
4
5
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
To enable this function, touch [ON] to highlight it.
– Touch [Power Save Start Time] to highlight it, then enter the start
time using the control panel keypad.
– Similarly, touch [Power Save End Time] to highlight it, then enter the
end time using the control panel keypad.
– With [OFF] selected, this function will be disabled.
Touch [OK] to complete the setting.
– To cancel the change, touch [Cancel].
In either case, the Weekly Timer Setting Screen will be restored.
If further changes are required, touch the desired key.
16
16-59