Finishing/Folding
To copy using Staple mode
0 If Staple is to be selected, select the orientation in which the original is
0 If Staple is selected, the machine also selects Sort automatically with
0 If staple position setting is different from the binding position specified in
0 With Auto selected on the Staple Position popup menu, the staple
0 Available paper weight is 60 to 90 gm
0 Using excessively curled paper or some types of thin paper in Staple
0 Each output tray of Finisher FS-510 and FS-511 has a limit in capacity.
1
2
3
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
positioned and the orientation of the page to be stapled, otherwise the
copies may not be stapled as desired.
disabling Group and Offset. Each copied set is supposed to be sorted
and stapled.
Page Margin of Application setting, the staple position is given priority.
position will be determined automatically to the longer side for A4 copy
paper, or to the shorter side for copy paper larger than A4.
see "Paper Weight" on page 10-4.
mode may cause poor results in arrangement of the stapled sets.
Be careful not to exceed the limit. For details, see "Paper Tray/ Output
Tray Capacity" on page 10-5.
Position the original to be copied.
Using the keypad, enter the desired number of copies.
Touch [Combine Originals] tab on the Basic Screen, then make Original
Direction and Margin settings.
–
For setting Original Direction, see "Specifying Orientation of
Original (Original Direction)" on page 5-14.
For setting Margin, see "Paper Tray/ Output Tray Capacity" on
page 10-5.
–
When completed, touch [Basic] tab to return to the Basic Screen.
2
. For details of other specifications,
7
7-15