Output For Machine With Separator - Konica Minolta bizhub 500 User Manual

7
7.6

Output for Machine with Separator

The machine with Separator installed can
deliver the printed sheets separately into
different trays.
The following four output modes are
available for use with two output trays. As
factory default, copies will be delivered
into the tray 2 in Group mode.
- Sort
Select this setting to separate each set of a multi-page original.
- Group
Select this setting to separate the copies of each page in a multi-page
original.
- Sort + Offset
Select this setting to rotate every other set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in
crosswise orientation v and the other tray with paper loaded in
lengthwise orientation w, e.g., A4- or B5-size paper.
- Group + Offset
Select this setting to rotate every other grouped set by 90° upon exit,
provided the same paper size is loaded in two trays, one tray with paper
loaded in crosswise orientation v and the other tray with paper loaded in
lengthwise orientation w, e.g., A4- or B5-size paper.
Specifying a tray for the output to be made in other job type than Copy (e.g.
Print, Reports, or Fax), printed sheets will be distributed into the specified
tray in order to prevent the output sheets from being mixed up.
Note
The output tray can be specified for each job type (Copy, Print, and
Reports). See "2 Output Setting>2 Output Tray Setting" on page 16-39
for details.
Downloaded From ManualsPrinter.com Manuals
7-28
Finishing/Folding
bizhub 500/420/360 (Phase 3)