Simplex/Duplex Setting; To Make Double-Sided Copies Using Adf - Konica Minolta bizhub 500 User Manual

4
4.8

Simplex/Duplex Setting

This section describes how to make double-sided copies from the original
scanned from the ADF or from the original glass, and also to make single-
sided copies from double-sided original.
The machine is initially set to make a single-sided copy from single-sided
original (1%1) as factory default.

To make double-sided copies using ADF

Follow the procedure below to make double-sided copies from single-sided
or double-sided original using the ADF.
0 Specify the Original Direction according to the orientation of the original
loaded in the ADF. For details, see "Specifying Orientation of Original
(Original Direction)" on page 5-14.
0 With 2%2 selected, the desired copy result may not be obtained from the
following types of double-sided original unless the original page margin
is specified manually.
A4 or smaller portrait-type original with top margin created
A4 or smaller landscape-type original with right/left margin created
B4 or larger portrait-type original with right/left margin createdB4 or
larger landscape-type original with top margin created
For details, see "Specifying Position of Binding Margin (Margin)" on
page 5-18.
0 When selecting 1%2 or 2%2 and making double-sided copies with top
margin created (arranged upside down on the reverse side), the binding
direction can be specified using the [Binding Direction] key,
1
Downloaded From ManualsPrinter.com Manuals
4-56
Position the original in the ADF.
Basic Copy Operations
bizhub 500/420/360 (Phase 3)