To Copy Using Insert Sheet - Konica Minolta bizhub 500 User Manual

6

To copy using Insert Sheet

0 Load the original in the ADF. If the number of original sheets exceeds 80,
use Separate Scan mode. For details, see "Separate Scan Setting" on
page 4-69.
0 With Separate Scan mode selected, the original glass can also be used
to scan the original.
0 Trays for copy paper and insertions should have the same paper size
loaded in the same orientation.
0 Tray 1 is initially specified as the insertion tray source. When loading
insertions into another tray, select that tray on the Insert Paper Screen.
The initial setting can be changed in the administrator setting. For details,
see "Select Tray for Insert Sheet" on page 16-142.
The tray source cannot be specified individually for each insertion
location.
0 Up to 30 insertion locations can be specified for the original from 1 to 999
pages.
0 Covers can also be attached. For details, see "Adding Covers (Cover
Mode)" on page 6-9.
The front and back covers can be fed from different tray source for each.
1
2
3
4
Downloaded From ManualsPrinter.com Manuals
6-16
Load the original.
Enter the desired print quantity from the control panel keypad.
Select the Simplex/Duplex mode.
– For details on specifying Simplex/Duplex mode, see
"Simplex/Duplex Setting" on page 4-56.
Load paper for insertions into the desired tray.
– The bypass tray is also available as insertion tray source.
Application Functions
bizhub 500/420/360 (Phase 3)