6
6
7
Downloaded From ManualsPrinter.com Manuals
6-120
–
To change or make fine adjustment on the print position currently
specified as indicated on the Print Position key, proceed to the next
step.
To complete this setting, proceed to step 8.
Touch [Print Position] to display the Print Position Screen.
–
Touch one of the nine Print Position keys to highlight it.
–
If fine adjustment is not required, proceed to step 8.
Touch [Change Adjustment] to display the Fine-Tune Screen.
–
Touch [Left] or [Right] under Left & Right Adjustment to highlight it.
Use [+] and [–] to enter a fraction in 0.1 mm increments. Touch the
bidirectional arrow key to move the cursor, then use [+], [–], or
control panel keypad to enter whole number part of the desired
value.
Similarly, touch [Top] or [Bottom] under Top & Bottom Adjustment
to highlight it, then enter the desired adjustment value.
To deactivate these adjustment, touch [No Adj.] for each.
Application Functions
bizhub 500/420/360 (Phase 3)