Utility <Administrator Setting>
5
6
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
Select the condition to operate the ADF Frame Erase function.
Select whether or not to operate this function whenever using ADF, and
also specify the erase amount.
–
Touch [ADF Frame Erase] to highlight it, then specify the desired
erase amount using [+] and [–] under Job Setting in the right side
area of the screen.
Available range is 1 to 5 mm. Over 5 mm of the erase amount
cannot be specified.
–
To disable this function, specify 0 mm as erasure amount.
–
This setting will be valid just after specified.
If further changes are required, touch the desired key.
16
16-75