Automatically Canceling The Settings (Automatic Panel Reset); Automatically Conserving Energy (Low Power Mode) - Konica Minolta BIZHUB C250P User Manual

Installation and operation precautions

Automatically canceling the settings (automatic panel reset)

If no operation is performed for a specified length of time while settings are
being changed, settings that have not been programmed are cleared and re-
turn to their defaults.
This is the automatic panel reset operation.
As the factory default, the automatic panel reset operation is performed after
1 minute.
!
Detail
The length of time until the automatic panel reset operation is performed
and whether or not it is performed can be set from the Utility mode. For
details, refer to "User Setting" on page 4-33.

Automatically conserving energy (Low Power mode)

If no operation is performed for a specified length of time the machine auto-
matically enters a mode where it conserves energy.
This is the Low Power mode.
The machine can receive jobs even while it is in Low Power mode.
As the factory default, the machine enters Low Power mode after 10 minutes.
Note
When a print job is received, the machine recovers from Low Power
mode and begins printing after it has finished warming up (within 30 sec-
onds at normal room temperature (73.4°F)).
The Low Power mode can also be canceled by pressing any key in the
control panel.
!
Detail
The length of time until the machine enters Low Power mode can be
changed. For details, refer to "User Setting" on page 4-33.
C250P
1
1-41