16
5
6
Downloaded From ManualsPrinter.com Manuals
16-96
Specify the setting for job change.
Select whether or not to release the Staple Setting and Original
Set/Bind Direction, and to reset all the setting data after completion of
each job.
–
Touch [When NEXT JOB is selected] to display the Next Job
Screen.
–
Touch the key to be specified. The setting menu will be displayed
on the right side of the screen.
Select either [ON] or [OFF] for each.
If further changes are required, touch the desired key.
Utility <Administrator Setting>
bizhub 500/420/360 (Phase 3)