Interrupting A Copy Job (Interrupt Mode) - Konica Minolta bizhub C550 User Manual

2
2.20

Interrupting a copy job (Interrupt mode)

The current jobs can be temporarily interrupted so a document can be copied with different copy settings.
This is convenient for quickly making a copy.
1
Position the document to be copied.
– For details on loading the document, refer to "Loading the document into the ADF" on page 2-30.
2
Press the [Interrupt] key.
– If a job is being printed, the message "The job is stopping."
appears.
The indicator on the [Interrupt] key lights up in green and
printing of the current job stops.
? What settings are selected when the [Interrupt] key is
pressed?
% When the [Interrupt] key is pressed, all functions and
settings are reset to their defaults.
Why is the [Interrupt] key not available?
?
% The [Interrupt] key cannot be pressed while an original is being scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing for the interrupting job begins.
5
After the interrupting job has finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off.
The copy settings return to those specified before printing was interrupted.
Note
If the interrupting job is cancelled, printing for the interrupted job automatically restarts.
2-82
Copy Operations
bizhub C650/C550/C451 (FE3)