Konica Minolta bizhub 500 User Manual page 325

Application Functions
Downloaded From ManualsPrinter.com Manuals
bizhub 500/420/360 (Phase 3)
– To clear the setting, touch [No Shift]. Press [C] (Clear) on the control
panel to clear the setting in both directions.
– Proceed to the next step to adjust the position of the back-side
image. If this adjustment is not required, proceed to step 7.
– Without a specific adjustment, the following settings will be applied
to the back-side image.
Shift direction: Opposite to the front-side image
Shift amount: Same as the front-side image
Do you want to delete the shift amounts once entered?
?
% Press [C] (Clear) on the control panel, then enter the correct
dimensions.
What should be done if the message "Input Error" is displayed?
?
% Press [C] (Clear) on the control panel, then reenter the correct value.
Is it available to change the shift direction even if the shift amount
?
is already specified?
% Yes. The shift direction can be changed at any time.
6
6-83